The Ovation™
3400 series is one of the best selling commercial tanning beds
of our time! No wonder; striking good looks, fits in a 7’ x 8’ room and
designed in several lamp configurations to meet your salon needs.
You choose; 10, 15 or 20 minute maximum session. The 10, 15 and 20 minute
variations are available with an optional triple face tanner totaling 1200
watts of power. Accessible countdown digital timer is standard. This bed will
last for years and give you the peace of mind that only steel construction
can provide.
Specifications for Ovation™ 3400:
34 Lamp Heartland Rave system – 20 minute session
18 Heartland Rave 5071 100 watt lamps in canopy
16 Heartland Rave 5071 100 watt lamps in bench
T-Max timer on board (T-Max wireless compatible)
Works in a drawer component tray underneath bench
*30 AMP single phase, 208 – 240 volt with ground required
(for optimum performance, running voltage should be 230 – 240)
*24 AMPS initial start up, 21 AMPS running at 220 VAC
.75 KVA Buck/Boost transformer may be required if outside 220 – 240 VAC
7’ X 8’ minimum room size required
¾ Ton (9,000 BTU) minimum A/C dedicated into room
Shipping weight: 755lbs.
Dimensions: 871/2”L X 421/2”W
5 Year Limited Warranty
Type B seal tight connector supplied. Located lower back in center of bed.
Type B flexible conduit required. *Actual amp reading will vary depending on
voltage-electrician must calculate load/line side amps when using a Buck/Boost
transformer to insure proper wire gauge and breaker size.
Minimum 8 gauge wire size is recommended for this 30 amp circuit to allow less
than 2% voltage drop up to 100 feet. Licensed electrician must refer to
National Electric Codes when determining proper wire gauge and breaker size for
each application. All specifications are subject to change.
Specifications for Ovation™
3400/3:
34 Lamp Heartland Rave system – 20 minute session
18 Heartland Rave 5071 100 watt lamps in canopy
16 Heartland Rave 5071 100 watt lamps in bench
(3) 400 watt facial lamps
T-Max timer on board (T-Max wireless compatible)
Works in a drawer component tray underneath bench
*30 AMP single phase, 220 – 240 volt with ground required
(for optimum performance, running voltage should be 230 – 240)
*24 AMPS initial start up, 26 AMPS running @ 220 VAC
.75 Buck/Boost transformer may be required if outside 220 – 240 VAC
7’ X 8’ minimum room size required
¾ Ton (9,000 BTU) minimum A/C dedicated into room
Shipping weight: 797lbs.
Dimensions: 871/2”L X 421/2”W
5 Year Limited Warranty
Type B seal tight connector supplied. Located lower back in center of bed.
Type B flexible conduit required. *Actual amp reading will vary depending on
voltage-electrician must calculate load/line side amps when using a Buck/Boost
transformer to insure proper wire gauge and breaker size.
Minimum 8 gauge wire size is recommended for this 30 amp circuit to allow less
than 2% voltage drop up to 100 feet. Licensed electrician must refer to
National Electric Codes when determining proper wire gauge and breaker size for
each application. All specifications are subject to change.
Specifications for Ovation™
3400R:
34 Lamp Heartland Rave system – 15 minute session
18 Heartland Rave 10071 R 100 watt lamps in canopy
16 Heartland Rave 10071 R 100 watt lamps in bench
T-Max timer on board (T-Max wireless compatible)
Works in a drawer component tray underneath bench
*30 AMP single phase, 220 – 240 volt with ground required
(for optimum performance, running voltage should be 230 – 240)
*24 AMPS initial start up, 21 AMPS running at 220 VAC
.75 KVA Buck/Boost transformer may be required if outside 220 – 240 VAC
7’ X 8’ minimum room size required
¾ Ton (9,000 BTU) minimum A/C dedicated into room
Shipping weight: 755lbs.
Dimensions: 871/2”L X 421/2”W
5 Year Limited Warranty
Type B seal tight connector supplied. Located lower back in center of bed.
Type B flexible conduit required. *Actual amp reading will vary depending on
voltage-electrician must calculate load/line side amps when using a Buck/Boost
transformer to insure proper wire gauge and breaker size.
Minimum 8 gauge wire size is recommended for this 30 amp circuit to allow less
than 2% voltage drop up to 100 feet. Licensed electrician must refer to
National Electric Codes when determining proper wire gauge and breaker size for
each application. All specifications are subject to change.
Specifications for Ovation™
3400R/3:
34 Lamp Heartland Rave system – 15 minute session
18 Heartland Rave 10071 R 100 watt lamps in canopy
16 Heartland Rave 10071 R 100 watt lamps in bench
(3) 400 watt facial lamps
T-Max timer on board (T-Max wireless compatible)
Works in a drawer component tray underneath bench
*30 AMP single phase, 220 – 240 volt with ground required
(for optimum performance, running voltage should be 230 – 240)
*24 AMPS initial start up, 26 AMPS running @ 220 VAC
.75 Buck/Boost transformer may be required if outside 220 – 240 VAC
7’ X 8’ minimum room size required
¾ Ton (9,000 BTU) minimum A/C dedicated into room
Shipping weight: 797lbs.
Dimensions: 871/2”L X 421/2”W
5 Year Limited Warranty
Type B seal tight connector supplied. Located lower back in center of bed.
Type B flexible conduit required. *Actual amp reading will vary depending on
voltage-electrician must calculate load/line side amps when using a Buck/Boost
transformer to insure proper wire gauge and breaker size.
Minimum 8 gauge wire size is recommended for this 30 amp circuit to allow less
than 2% voltage drop up to 100 feet. Licensed electrician must refer to
National Electric Codes when determining proper wire gauge and breaker size for
each application. All specifications are subject to change.
Specifications for Ovation™
3400S:
34 Lamp Heartland Rave system – 10 minute session
18 Heartland Rave Select 100 watt lamps in canopy
16 Heartland Rave Select 100 watt lamps in bench
T-Max timer on board (T-Max wireless compatible)
Works in a drawer component tray underneath bench
*30 AMP single phase, 220 – 240 volt with ground required
(for optimum performance, running voltage should be 230 – 240)
*24 AMPS initial start up, 21 AMPS running at 220 VAC
.75 KVA Buck/Boost transformer may be required if outside 220 – 240 VAC
7’ X 8’ minimum room size required
¾ Ton (9,000 BTU) minimum A/C dedicated into room
Shipping weight: 755lbs.
Dimensions: 871/2”L X 421/2”W
5 Year Limited Warranty
Type B seal tight connector supplied. Located lower back in center of bed.
Type B flexible conduit required. *Actual amp reading will vary depending on
voltage-electrician must calculate load/line side amps when using a Buck/Boost
transformer to insure proper wire gauge and breaker size.
Minimum 8 gauge wire size is recommended for this 30 amp circuit to allow less
than 2% voltage drop up to 100 feet. Licensed electrician must refer to
National Electric Codes when determining proper wire gauge and breaker size for
each application. All specifications are subject to change.
Specifications for Ovation™
3400S/3:
34 Lamp Heartland Rave system – 10 minute session
18 Heartland Rave Select 100 watt lamps in canopy
16 Heartland Rave Select 100 watt lamps in bench
(3) 400 watt facial lamps
T-Max timer on board (T-Max wireless compatible)
Works in a drawer component tray underneath bench
*30 AMP single phase, 220 – 240 volt with ground required
(for optimum performance, running voltage should be 230 – 240)
*24 AMPS initial start up, 26 AMPS running @ 220 VAC
.75 Buck/Boost transformer may be required if outside 220 – 240 VAC
7’ X 8’ minimum room size required
¾ Ton (9,000 BTU) minimum A/C dedicated into room
Shipping weight: 797lbs.
Dimensions: 871/2”L X 421/2”W
5 Year Limited Warranty
Type B seal tight connector supplied. Located lower back in center of bed.
Type B flexible conduit required. *Actual amp reading will vary depending on
voltage-electrician must calculate load/line side amps when using a Buck/Boost
transformer to insure proper wire gauge and breaker size.
Minimum 8 gauge wire size is recommended for this 30 amp circuit to allow less
than 2% voltage drop up to 100 feet. Licensed electrician must refer to
National Electric Codes when determining proper wire gauge and breaker size for
each application. All specifications are subject to change.
The Ovation™
3400 series is one of the best selling commercial tanning beds
of our time! No wonder; striking good looks, fits in a 7’ x 8’ room and
designed in several lamp configurations to meet your salon needs.
You choose; 10, 15 or 20 minute maximum session. The 10, 15 and 20 minute
variations are available with an optional triple face tanner totaling 1200
watts of power. Accessible countdown digital timer is standard. This bed will
last for years and give you the peace of mind that only steel construction
can provide.
