|
|
BRAVO 154 TANNING BED |
 The 160 watt power of the Rave™ 160 APR
lamps combined with
the 100 watt Rave™ 10071 R produces one of the best 15 minute tans
in the industry. This winning combination will produce the kind of
tan your customers will tell their friends about! User friendly
countdown digital timer is standard. This upgrade bed requires
no external heat exhaust to operate efficiently. This makes
installation a snap. Because of the size of the Bravo™, we
recommend a minimum room size of 7’ x 9’. Your customers will
love the wide body feel of this state of the art tanning bed.
|
Specifications for BRAVO™ 154:
|
44 Lamp Heartland Rave system – 15 minute session
24 Heartland Rave 160 APR 160 watt lamps in canopy
20 Heartland Rave 10071 R 100 watt lamps in bench
T-Max timer on board (T-Max wireless compatible)
(2) Easy roll-out component trays underneath bench
680 CFM timer controlled external body cooling fans with stand
*50 AMP rated single phase, 220 – 240 volt with ground required
(for optimum performance, running voltage should be 230 – 240)
*40 AMPS initial start up, 35 AMPS running @ 220VAC
1.5 KVA Buck/Boost transformer required if outside 220 – 240 VAC
7’ X 9’ minimum room size required
11/2 Ton (18,000 BTU) minimum A/C dedicated into room
Shipping weight: 1115lbs.
Dimensions: 871/2”L X 51”W
5 Year Limited Warranty
|
|
|
|
Type B seal tight connector supplied. Located lower back in center of bed.
Type B flexible conduit required. *Actual amp reading will vary depending on
voltage-electrician must calculate load/line side amps when using a Buck/Boost
transformer to insure proper wire gauge and breaker size.
Minimum 6 gauge wire size is recommended for this 50 amp circuit to allow less
than 2% voltage drop up to 100 feet. Licensed electrician must refer to
National Electric Codes when determining proper wire gauge and breaker size for
each application. All specifications are subject to change.
|
Specifications for BRAVO™ 154/3:
|
44 Lamp Heartland Rave system – 15 minute session
24 Heartland Rave 160 APR 160 watt lamps in canopy
20 Heartland Rave 10071 R 100 watt lamps in bench
(3) 400 watt pop-in facial lamps
T-Max timer on board (T-Max wireless compatible)
(2) Easy roll-out component trays underneath bench
680 CFM timer controlled external body cooling fan with stand
*50 AMP rated single phase, 220 – 240 volt with ground required
(for optimum performance, running voltage should be 230 – 240)
*34 AMPS initial start up, 37 AMPS running @ 220 VAC
1.5 KVA Buck/Boost transformer required if outside 220 – 240 VAC
7’ X 9’ minimum room size required
11/2 Ton (18,000 BTU) minimum A/C dedicated into room
Shipping weight: 1115lbs.
Dimensions: 87”L X 51”W
5 Year Limited Warranty
|
|
|
|
Type B seal tight connector supplied. Located lower back in center of bed.
Type B flexible conduit required. *Actual amp reading will vary depending on
voltage-electrician must calculate load/line side amps when using a Buck/Boost
transformer to insure proper wire gauge and breaker size.
Minimum 6 gauge wire size is recommended for this 50 amp circuit to allow less
than 2% voltage drop up to 100 feet. Licensed electrician must refer to
National Electric Codes when determining proper wire gauge and breaker size for
each application. All specifications are subject to change.
|
|
|
|
